3 Ways to Apply Clear Coat - wikiHow (2024)

Download Article

Co-authored byAngel Ricardo

Last Updated: July 28, 2022Approved

Download Article

  • Spraying the Car Body
  • |
  • Clear Coat Maintenance
  • |
  • Painting Materials
  • |
  • |
  • Tips
  • |
  • Warnings

Clear coat is a transparent paint that goes over your base coat and protects it from damage and UV rays. It also gives a glossy finish that deepens the base color quality and lets you easily buff out small scratches. Before you paint, make sure to choose quality equipment and mask off the body of the car before sanding off any previous damaged clear coat. Spray the car with thin, wet coats of clear coat paint and let them dry between layers. To keep your new clear coat looking fresh, make sure to gently wash and wax it on a regular basis.

Method 1

Method 1 of 3:

Spraying the Car Body

Download Article

  1. 1

    Hold the spray gun 6 to 8 inches (15 to 20cm) away from the surface. If you go over a section where the surface of the car is tilted, tilt the gun as well in order to be parallel to the surface. This should give you the lightest, most even paint layers possible.[1]

  2. 2

    Make steady, even passes that overlap each other by 50%. Covering half of the previous pass each time will help you achieve an even application and prevent the “tiger striping” effect. Make sure to spray on the paint in consistently straight, even lines across the car surface.

    Advertisement

  3. 3

    Apply a coat of paint to the car. Spray a light coat of paint all over the body of the car. Keep the paint thin and wet in order to achieve an even application and keep the drying time short.[2]

    • If the paint is too thick, you can run into problems like filminess or a foggy, hazy effect.[3]
  4. 4

    Let the paint dry for at least 10 minutes. With thin individual layers of paint, the drying time is fairly short between applications. Waiting a full 10 minutes between coats will help the paint settle and set, or “flash,” before it’s covered by another layer.[4]

  5. 5

    Apply a second coat of paint to the entire car. After the first layer has dried, add a second layer of paint. This layer can be a bit thicker because it will have more time to dry out completely.[5] Make sure to apply the paint slowly and carefully to avoid any drips and imperfections.

  6. 6

    Wait 1 hour for the layers to fully dry. Don’t touch the clear coat while you’re waiting for it to dry. Let it sit undisturbed in order to let the paint cure and set properly. This will help ensure the clear coat’s durability and quality.

  7. Advertisement

Method 2

Method 2 of 3:

Clear Coat Maintenance

Download Article

  1. 1

    Hand wash your car every 1-4 weeks. Use a quality wash mitt, 2 buckets of washing and rinsing water, car-wash soap, and microfiber towels to wash your car regularly. Take extra care to be gentle over the clear coat and remove any dirt buildup that could cause scratches.[6] It’s best to wash your car sooner rather than later to remove any dust and dirt that could damage your clear coat.

  2. 2

    Wait 30-45 days before waxing, buffing, or going through a carwash. After applying clear coat, it’s important to wait and let the paint harden before applying too much pressure. For warmer climates, waiting 30 days should be sufficient. However, for cars in colder climates, you should wait 45 days because low temperatures can slow the curing process.[7]

  3. 3

    Ask car wash employees to take care with your clear coat. Clear coat can be easily scratched during a ride through an older car wash. If the car wash includes a manual rub-down, make sure the attendants use clean, soft towels on the clear coat.

    • Typically, modern car washes are gentler and won’t scratch your clear coat.
  4. 4

    Wax your clear coat carefully every 2-3 months. Excessive buffing and rubbing can damage the clear coat, so make sure to use a non-abrasive formula and polish carefully. Waxing regularly helps protect the paint job and visually enhances the paint quality.[8]

    • Generally, car wax only lasts about 2-3 months, but depending on the weather and the car’s paint condition, this time may vary.
  5. Advertisement

  1. 1

    Choose a solvent and activator for your current weather conditions. Think about size and area of the repair as well as the current temperature and humidity when making your choice.[9] Some products are formulated for higher temperatures and extra moisture, so make sure to check the product labels. Keep in mind that you should also try to paint in optimal conditions.

  2. 2

    Try to paint on a warm day. In general, it's not a good idea to paint your car if you’re in temperatures above 90°F (32°C) or below 55°F (13°C). You should also avoid painting in direct sunlight by painting in the shade, in the early morning, or at nighttime.[10]

  3. 3

    Use quality car-painting equipment. For this project, higher quality tools will likely be worth the extra cost. You can buy or rent a gun, compressor, respirator, and air/oil separator along with an air hose.

    • Clear coat is best applied with a spray gun because it acts like a solvent. If you try to apply it with pressure, rather than floating it on with an aerosol tool, it can remove the base coat beneath it.
    • You could also use clear coat in a spray can, but a gun will give you a smoother, more professional finish.
  4. 4

    Wet-sand off all of the previous clear coat if it is damaged. Look for any peeling, delaminating, or flaking in the old clear coat. If you find damage, use 400-600 grit sandpaper and an orbital sander to wet-sand off all of the old clear-coat. It’s important to start over with a base coat for the new urethane to bond properly.[11]

    • To wet-sand, spray your sandpaper down with water. This will prevent the sandpaper from creating deep scratches in the car’s surface.[12]
    • Wipe down the surface with a tack cloth after sanding to clean up any dust.
  5. 5

    Practice spraying on a smooth piece of scrap metal. Before you spray your car, test out your materials and practice your spraying technique on a smooth metal surface. Follow all the steps from start to finish, making note of any issues or imperfections that you should adjust for the final project.

    • If you’re using a can of spray clear coat, make sure to shake it well before spraying.
  6. Advertisement

Expert Q&A

Search

Add New Question

  • Question

    Why is it important to wax your clear coat?

    Angel Ricardo
    Auto Technician

    Angel Ricardo is the owner of Ricardo's Mobile Auto Detail headquartered in Venice, California. With over 10 years of experience in mobile detailing, Angel continues to attend auto detailing trainings to improve his customer service and auto detailing skills.

    Angel Ricardo

    Auto Technician

    Expert Answer

    Clear coat is usually as thick as a sheet of paper. It's very thin, so it's highly recommended to always wax your cars as additional protection from damage.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 1Helpful 2

  • Question

    Is it OK to go to a car wash after a paint job?

    Angel Ricardo
    Auto Technician

    Angel Ricardo is the owner of Ricardo's Mobile Auto Detail headquartered in Venice, California. With over 10 years of experience in mobile detailing, Angel continues to attend auto detailing trainings to improve his customer service and auto detailing skills.

    Angel Ricardo

    Auto Technician

    Expert Answer

    I would wait a couple of weeks before washing your car. Even then, you'll want to avoid automatic car washes since the recycled water they use often has small particles in it that could scratch your clear coat.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 1Helpful 1

  • Question

    What's the benefit of car wax?

    Angel Ricardo
    Auto Technician

    Angel Ricardo is the owner of Ricardo's Mobile Auto Detail headquartered in Venice, California. With over 10 years of experience in mobile detailing, Angel continues to attend auto detailing trainings to improve his customer service and auto detailing skills.

    Angel Ricardo

    Auto Technician

    Expert Answer

    Car wax basically acts as a protective buffer between your car's paint and the elements.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 0Helpful 0

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Tips

      • After applying a base coat, always apply your clear coat within 24 hours. Check the minimum drying time on the base coat for more information.

        Thanks

        Helpful1Not Helpful0

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Name

      Please provide your name and last initial

      Submit

      Thanks for submitting a tip for review!

      Advertisement

      Warnings

      • Always use protective equipment when painting, such as rubber gloves, a chemical respirator, and safety goggles.

        Thanks

        Helpful3Not Helpful0

      • Make sure to paint in a well-ventilated area to avoid inhaling hazardous paint fumes.

        Thanks

        Helpful2Not Helpful2

      • Automotive paint is extremely hazardous, so make sure to keep it away from children.

        Thanks

        Helpful2Not Helpful4

      • Always read the directions and warnings on the product labels.

        Thanks

        Helpful1Not Helpful2

      Advertisement

      You Might Also Like

      How to Reset a Traction Control Light (TCS)How to Reset Your Steering Angle Sensor Without an OBD-2
      What to Do If Your Car’s Anti-Theft System Prevents It from StartingQuick and Easy Steps to Reset the Maintenance Required LightHow to Reset a Gas Gauge NeedleHow toFix a Locked Steering WheelHow toFix a Cigarette Lighter in a CarHow toOpen a Hood with a Broken LatchHow to Identify Your Vehicle’s TransmissionHow toChange an Oxygen SensorHow to Unlock the Hood of Your CarHow toDetermine Gear Ratio

      Advertisement

      More References (3)

      About This Article

      3 Ways to Apply Clear Coat - wikiHow (42)

      Co-authored by:

      Angel Ricardo

      Auto Technician

      This article was co-authored by Angel Ricardo. Angel Ricardo is the owner of Ricardo's Mobile Auto Detail headquartered in Venice, California. With over 10 years of experience in mobile detailing, Angel continues to attend auto detailing trainings to improve his customer service and auto detailing skills. This article has been viewed 164,112 times.

      14 votes - 81%

      Co-authors: 8

      Updated: July 28, 2022

      Views:164,112

      Categories: Customizing and Modifying Cars | Car Maintenance and Repair

      Article SummaryX

      If you want to apply a clear coat to your car, make sure to pick a day when the temperature won’t rise above 90 degrees Fahrenheit and avoid painting in direct sunlight or you might ruin the finish. When you’re ready to apply your clear coat, hold the spray gun 6 to 8 inches away from the surface of your car. Keep the gun tilted parallel to the surface and if you come to a section with an angle, adjust your grip so the gun remains aligned. As you go around your car, overlap each pass by 50 percent to ensure an even application and prevent tiger striping. After you’ve applied a full coat, let the paint dry for 10 minutes before applying a second coat. Once the car has 2 coats, give it an hour to fully dry before touching it. For more advice, like how to take care of a clear coat, read on!

      Did this summary help you?

      In other languages

      Portuguese

      French

      German

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 164,112 times.

      Reader Success Stories

      • 3 Ways to Apply Clear Coat - wikiHow (43)

        Robert Mancera

        Aug 3, 2019

        "I'm going to paint a bumper and fender on my car. I didn't know the process to go about it, but this..." more

      More reader storiesHide reader stories

      Did this article help you?

      Advertisement

      3 Ways to Apply Clear Coat - wikiHow (2024)

      References

      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Duane Harber

      Last Updated:

      Views: 5315

      Rating: 4 / 5 (51 voted)

      Reviews: 90% of readers found this page helpful

      Author information

      Name: Duane Harber

      Birthday: 1999-10-17

      Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

      Phone: +186911129794335

      Job: Human Hospitality Planner

      Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

      Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.